DISCOVER THE NEW GOLD STANDARD IN DIMMING

Diginet LEDsmart+ featuring MultiMate technology

Single and multi-way dimming & switching without extra wires or controls.



MMDM/RT

Rotary Dimmer Switch
with built-in on/off switch and multi-way control

MMDM/PB

Push Dimmer Switch
with built-in on/off switch and multi-way control

MMSW/PB

Push Button Switch
for LED lighting with built-in multi-way control

MMTM/PB

Push Timer Minute
programmable between 1 and 30 minutes with built-in multi-way control

MMTH/PB

Push Timer Hour
programmable between ¼ hour and 7½ hours with built-in multi-way control


See how it works

Watch the technical video to see how easy Diginet LEDsmart+ devices are to install for both new and existing installations.


Making the impossible, possible.

MultiMate™ technology allows Diginet LEDsmart+ devices to be wired in parallel to the same lighting load to provide two-way, three-way or multi-way dimming and switching for the first time without the need for strapper wires, dedicated remote switch wiring or ‘control bus’.

With no additional wiring, no expensive control systems and no new installation methods to learn, Diginet LEDsmart+ is the quick and easy way to add value and convenience to your customers.

What is MultiMate™ technology?

MultiMate™ is a revolutionary patented technology, developed right here in Australia by Diginet Control Systems – part of the Gerard Lighting Group – that allows multi-way switching and dimming of lighting wired in parallel without the need for an expensive lighting control system.

Product Installation and Setup Functions

LEDsmart+ Dimmers

LEDsmart+ Switches

LEDsmart+ Timers

The only dimmer you need to carry

With single-point and multi-way control all from the one device, the new Diginet LEDsmart+ range featuring MultiMate™ technology are the only dimmers, switches and timers you need to carry.

Brightness Range

0-100%

for typical LED loads

Minimum Load

1W

400W

Maximum Load*


2-Wire

Active & Load
No neutral required

*refer to compatible load table


Accessories for easy customisation

Diginet LEDsmart+ products have many options that allow the installer to easily customise solutions to their customers’ exact requirements.

LARGE & SMALL DIALS

Standard

Customers can choose from large or small dimmer dials to suite their aesthetic and deliver single or multi-dimmer control from one wall plate.

ROTARY ADAPTOR KIT FOR CLIPSAL SATURN™& CLIPSAL SATURN ZEN™ WALL PLATES

Optional

Allows LEDsmart+ Rotary Dimmers to be quickly and easily adapted to fit Clipsal Saturn™ and Clipsal Saturn Zen™wall plates.


INTERCHANGEABLE COLOURED BEZELS

Standard

Different coloured bezels allow the installer to customise the indicator bezel on the switch to suit the customer’s preference.

PUSH BUTTON LABELLING

Standard

Diginet LEDsmart+ Push Button devices can be fitted with optional ‘clear’ plastic cap, which allows a label to be placed inside. Labels can be printed on standard paper or thin card on any printer, in any font or colour.

INTERCHANGEABLE COLOURED RINGS

Standard

Different coloured silicon rings allow the installer to customise the Rotary Dimmer’s indicator ring to suit the customer’s environment.

PUSH BUTTON ADAPTOR KIT FOR CLIPSAL SATURN™& CLIPSAL SATURN ZEN™ WALL PLATES

Optional

Allows LEDsmart+ Push Button devices to be quickly and easily adapted to fit Clipsal Saturn™ and Clipsal Saturn Zen™wall plates.

Patented MultiMate™ technology allows multi-way dimming without the need for an expensive lighting control system.

With no additional wiring, Diginet LEDsmart+ is perfect for new installations and retrofits.